American UL AC Power Cord NEMA 5-15P Plug to IEC 60320 C13 Connector

H05V-U BV Solid Copper Wire PVC Insulated Electrical Wire and Cables, for protected fixed installations inside appliances and in or on lighting fittings. Further for installations in pipes on and under plaster, however, only for signal circuit and control circuit.

H07V-K cable is used for the internal wiring of electric motors and transformers as well as other electrical appliances and lighting applications. It can be used in and at electronic appliances for measuring, regulating and controlling. The cables are also ideal for laying in pipes, surface wiring and conduit installations.

Wear-Resistant & Heat-Resistant Flexible Welding Cable, Welding cable is a relatively large-diameter, single-core insulated cable, welding electrodes, ground clamps, and automated welding heads. Cables usually, but not always, have different colors so users can distinguish between the live wire and the ground wire. Welding cables have great flexibility and are soft but have strong abrasion- and oil-resistant insulation. Class K welding cables are rated at 600 volts. This welding cable comes in a range of colors including red, black, orange, yellow, green, and blue.

RVVP Flexible PVC Insulated with Screened and Shielded Electrical Wire and Cables. Plain annealed copper wires, stranded Class 5 or Class 6; flexible PVC insulated; aluminum foil tape screened, bare or tinned copper wires braided/shielded; flexible PVC sheath; 300/500V.

UL2464 Multi-cores Copper Wire PVC Insulated AWM Electronic Wire. UL2464 cable is fabricated from Polyvinyl Chloride (PVC) sheath. It is multi-cores with options for 2 to 100 conductor wires. Different colors are applied upon each wire insulation for easy identification. UL2464 compliant cable can be supplied on customize or standard base, in various AWG size, configuration, shielding option, designated insulation and jacket wall thickness.

U-1000 R2V XLPE Insulated YJV Power Cable, these U-1000 R2V cables with XLPE insulation and PVC outer sheath can be used in all low voltage power installations. Multiconductors cables are adapted to remote control and telecontrol installations. It could be installed outside without protection (UV resistance, AN3 according to NF C 15-100).

6491X H07V-R Copper Wire PVC Insulated Electrical Cable, for protected fixed installations inside appliances and in or on lighting fittings. Further for installations in pipes on and under plaster, however, only for signal circuit and control circuit.

RVH Multi-Conductor High-Conductivity Copper Speaker Cable. The speaker cable is used to connect the power amplifier and the speaker. The current signal flowing is much larger than the video cable and the audio cable mentioned above. Because the signal amplitude is large, this kind of cable often has no shielding layer. For this kind of wire, the key is to reduce its resistance. Because the output impedance of the modern power amplifier is very low, the requirements for the speaker cable are also increased, such as selecting large cross-sectional area or multiple stranded wires.